Table of Contents
Advertisement
5.
Find the SAS Host Bus Adapter's Driver ID in the list, and make a note of the corresponding
Ctrl ID. In this example, the SAS Host Bus Adapter is Drv[2C], and the Ctrl ID is 2F.
Adding An Integrated Mirror Volume
To add an Integrated Mirror volume, follow these steps:
1.
Start drvcfg, using the Driver ID and Ctrl ID of the SAS Host Bus Adapter (See
the Driver ID and Ctrl ID" (page
is 2F:
Shell> drvcfg -s 2C 2F
The Adapter List screen appears:
2.
Select the SAS Host Bus Adapter (SAS1068) and press Enter. The Adapter Properties
screen appears:
32)). In this example, the Driver ID is 2C, and the Ctrl ID
Example: Adding, Viewing, and Deleting An Integrated Mirror Volume Using drvcfg
"Determining
33
Advertisement
Table of Contents
Need help?
Do you have a question about the AH226A - Smart Array E500/256MB Controller RAID and is the answer not in the manual?
Questions and answers