Deleting The Spare Disk; Updating Sas Controller Firmware Online - HP AH226A - Smart Array E500/256MB Controller RAID Support Manual

No. of Loss Dword Syncs
No. of PHY Reset Problems encountered
Statistics for PHY ID
No. of Invalid Dwords
No. of Running Parity Errors
No. of Loss Dword Syncs
No. of PHY Reset Problems encountered
Statistics for PHY ID
No. of Invalid Dwords
No. of Running Parity Errors
No. of Loss Dword Syncs
No. of PHY Reset Problems encountered
Statistics for PHY ID
No. of Invalid Dwords
No. of Running Parity Errors
No. of Loss Dword Syncs
No. of PHY Reset Problems encountered
Statistics for PHY ID
No. of Invalid Dwords
No. of Running Parity Errors
No. of Loss Dword Syncs
No. of PHY Reset Problems encountered
Statistics for PHY ID
No. of Invalid Dwords
No. of Running Parity Errors
No. of Loss Dword Syncs
No. of PHY Reset Problems encountered
Statistics for PHY ID
No. of Invalid Dwords
No. of Running Parity Errors
No. of Loss Dword Syncs
No. of PHY Reset Problems encountered

Deleting the Spare Disk

To delete the Global Hot Spare disk from the controller with the device file /dev/sasd0:
# sasmgr delete -D /dev/sasd0 -q raid -q spare
WARNING: This is a DESTRUCTIVE operation.
This might result in failure of current I/O requests.
Do you want to continue ?(y/n) [n]...y
Spare drive is deleted successfully.

Updating SAS Controller Firmware Online

To update the firmware on a SAS controller online, use this command:
sasmgr [-h] [-f] download -D /dev/sasdX -q downloadfile=<fw_image> -q
hba
Where:
sasdX
<fw_image>
If you do not specify the -f option with this command, sasmgr displays a warning message
before continuing. Otherwise, it suppresses the warning message and executes the command.
64 Configuring and Troubleshooting the Controller Online
The device file for the SAS controller
The firmware image file to download
: 0
: 0
: 2
: 0
: 0
: 0
: 0
: 3
: 0
: 0
: 0
: 0
: 4
: 0
: 0
: 0
: 0
: 5
: 0
: 0
: 0
: 0
: 6
: 0
: 0
: 0
: 0
: 7
: 0
: 0
: 0
: 0