HP Integrity rx4610 User Manual page 9

Chapter 1: Controls, Ports, and Indicators
Table 1-1. Control Panel Switch and Indicators
Control / Indicator
Power On/Off
Reset
INIT
System Power LED
(Green)
Power Fail LED
(Amber)
Fan Fail LED (Amber)
General Fault LED
(Amber)
Front Panel LCD
Description
This button turns the HP Server power On or Off. The
+12 V standby voltage is On whenever the server power
cords are plugged in.
When pressed, it resets the server and causes the power on
self-test (POST) to run.
When pressed, the system performs a crash dump provided
the dump is supported by the operating system.
When lit continuously, it indicates the presence of DC
power in the server. When not lit, it indicates power is
turned off or the power source is disrupted.
When lit continuously, it indicates a power failure.
When flashing, it indicates a fan failure.
When lit continuously, it indicates a hot plug PCI fault.
It displays information about the processor type and the
POST codes.
2