LV-7575 Expand Serial Command Functional Specifications
8.8.2 CF_LAMPMODE Command
Command
"CF_LAMPMODE_%1" [CR]
"NORMAL" ------------------------ Set Lamp status to Normal mode
%1
"ECO" ------------------------------- Set Lamp status to Silent mode
"AUTO" ----------------------------- Set Lamp status to Auto mode
Select Lamp mode (Available only in the normal Power ON status)
Details
The value set by this command is stored in EEPROM and the setting remains
effective after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
8.9 Sound Command
8.9.1 CF_VOLUME Command
Command
"CF_VOLUME_%1" [CR]
"000-063" --------------------------- Directly specify value of Volume.
%1
"UP" --------------------------------- Increment setting value of Volume by 1
"DN" --------------------------------- Decrement setting value of Volume by 1
Control level of Volume (Available only in the normal Power ON status)
Set Volume Up/Down the same way as RC and also directly specify value of
Details
Volume. When setting Volume value, the Sound Mute ON status is canceled just
like RC operation. The value set by this command is stored in Projector's memory.
Acceptable
Response
Unacceptable
8.9.2 CF_MUTE Command
Command
"CF_MUTE_%1" [CR]
"ON" ----------------------------- Set Sound Mute to ON
%1
"OFF" --------------------------- Set Sound Mute to OFF
Details
Control ON/OFF of Sound Mute (Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
8.9.3 CF_BLTINSP Command
Command
"CF_BLTINSP_%1" [CR]
"ON" ----------------------------- Set Built-in speaker to ON
%1
"OFF" --------------------------- Set Built-in speaker to OFF
Details
Set ON/OFF of Built-in speaker (Available only in the normal Power ON status).
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
32/71