Cf_Kystnmode Command; Lamp Command; Cf_Lamph Command; Cf_Lampmode Command - Canon LV-5220 - Multimedia Projector SVGA Functional Specification

Expand Serial Command Functional Specification

8.8.6. CF_KYSTNMODE Command

Command "CF_KYSTNMODE_%1" [CR]
"STR" ----------- Set Keystone store Mode to Store
%1
"RST" ----------- Set Keystone store Mode to Reset
Details Set Keystone store Mode. (Only valid when it is in the usual Power On status)
Acceptable
Response
Unacceptable

8.9. Lamp Command

8.9.1. CF_LAMPH Command

Command "CF_LAMPH_%1" [CR]
%1 "RST"
Reset total lamp running time. (Only valid when it is in the usual Power On
Details
status)
Acceptable
Response
Unacceptable

8.9.2. CF_LAMPMODE Command

Command "CF_LAMPMODE_%1" [CR]
"NORMAL" ---------- Set Lamp Mode to Normal
%1 "ECO" ---------------- Set Lamp Mode to Silent
" A U T O " - - - - - - - - - - - - - Set Lamp Mode to Auto
Select Lamp Mode. (Only valid when it is in the usual Power On status)
Details This setting status is stored in EEPROM, hold even if AC Power turning Off and
On.
Acceptable
Response
Unacceptable

8.10. Sound Command

8.10.1. CF_VOLUME Command

Command "CF_VOLUME_%1" [CR]
"000 – 063" -------------- Directly set Volume value
%1 "UP" ----------------------- Volume setting value +1
"DN" ----------------------- Volume setting value -1
Control Volume setting value. (Only valid when it is in the usual Power On
status)
The same operation as a Remote Control's turning up/down the volume. Also, the
Details
Command directly sets the volume value.
When setting volume value like Remote Control Unit operation, Sound Mute On
will be canceled. The setting value will be stored in a Projector.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Page 22 of 41