Lamp Series Command; Cf_Lamph Command; Cf_Lampmode Command; Sound Series Command - Canon LV-7565 Specification

Expand Serial Command Specification

8.8. Lamp Series Command

8.8.1. CF_LAMPH Command

Command "CF_LAMPH_%1" [CR]
%1 "RST"
Reset total Lamp running time. (Only valid when it is in the usual Power On
Details
state)
Acceptable
Response
Unacceptable

8.8.2. CF_LAMPMODE Command

Command "CF_LAMPMODE_%1" [CR]
"NORMAL" -------- Set Lamp mode to Normal
%1 "ECO" ---------------- Set Lamp mode to Silent
"AUTO" ------------- Set Lamp mode to Auto
Set Lamp mode. (Only valid when it is in the usual Power On state)
Details The value set by this Command is stored in EEEPROM. When All Off the
Projector, the setting will
Acceptable
Response
Unacceptable

8.9. Sound Series Command

8.9.1. CF_VOLUME Command

Command "CF_VOLUME_%1" [CR]
"000 ~ 063" ----------- Directly set Volume value
%1 "UP" ----------------- Volume setting value +1
"DN" ----------------- Volume setting value -1
Control Volume setting value. (Only valid when it is in the usual Power On
state.)
The same operation as a Remote control's turning up/down the volume. Also,
Details
the Command directly sets the volume value.
When setting volume value like Remote control unit operation, Sound Mute On
will be canceled. The setting value will be stored in a Projector.
Acceptable
Response
Unacceptable

8.9.2. CF_MUTE Command

Command "CF_MUTE_%1" [CR]
"ON" ------- Set Sound Mute to On
%1
"OFF" ------ Set Sound Mute to Off
Control Sound Mute On / Off. (Only valid when it is in the usual Power On
Details
state)
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
valid.
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Page 27 of 46