Cf_P-Manetime Command; Cf_Fanspeed Command; Cf_Keydis Command; Cf_Fdefault Command - Canon LV-7575 Specifications

LV-7575 Expand Serial Command Functional Specifications

8.10.10 CF_P-MANETIME Command

Command "CF_P-MANETIME_%1" [CR]
"01" - "30" ----------------------- Directly specify setting time by the minute
"UP" ------------------------------- Increment value by 1
%1
"DN" ------------------------------ Decrement value by 1
Set time of Power Management time (Available only in the normal Power ON
status)
Details
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable

8.10.11 CF_FANSPEED Command

Command "CF_FANSPEED_%1" [CR]
"MAX" ------------------------------ Select maximum fan speed
%1
"NOR" ------------------------------ Select normal fan speed
Switch Fan Control Speed mode.(Available only in the normal Power ON status)
Details The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable

8.10.12 CF_KEYDIS Command

Command "CF_KEYDIS_%1" [CR]
"NONE" ----------------------- RC and KEY are both enabled.
%1 "RC" ---------------------------- RC is disabled.
"KEY" -------------------------- KEY is disabled.
Disable RC and/or KEY functions
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable

8.10.13 CF_FDEFAULT Command

Command "CF_FDEFAULT_%1" [CR]
%1 "RST"
Reset to Factory Default setting
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
(Switched in 01→02→ --- → 30 → 01 order)
(Switched in 30→29→ --- → 01 → 30 order)
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
36/71