1. Manuals
  2. Brands
  3. Canon Manuals
  4. Projector
  5. LV-7555
  6. Specifications

Canon LV-7555 Specifications

Expand serial command function specification for mr3p series
Hide thumbs Also See for LV-7555:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
LV-7555 (For MR3P series)
Expand Serial Command Specification
Page
1/53

Advertisement

Table of Contents
loading

Related Manuals for Canon LV-7555

Summary of Contents for Canon LV-7555

  • Page 1 LV-7555 (For MR3P series) Expand Serial Command Specification Page 1/53...
  • Page 2 -CONTENT- 1. OVERVIEW 2. Serial Interface Specification 2.1 Communication Specification 2.2 Connection 3. Note for Communications 4. Name Definition 5. Functional Execution Command Table 5.1 Image Series Command Table 5.2 PC Control Series Command Table 5.3 Input Control Series Command Table 5.4 Screen Series Command Table 5.5 Lam Series Command Table 5.6 Sound Series Command Table...

  • Page 3: Table Of Contents

    8.4.6 CF_GAMMA COMMAND 8.4.7 CF_WBAL-COMMAND 8.4.8 CF_COLTEMP COMMAND 8.4.9 CF_NZRED COMMAND 8.4.10 CF_PROGV COMMAND 8.4.11 CF_IMAGE COMMAND 8.4.12 CF_IMAGEADJ COMMAND 8.4.13 CF_APCTRL COMMAND 8.4.14 CF_COLOMNSAV COMMAND 8.4.15 CF_COLMNLD COMAND 8.4.16 CF_TURBO COMMAND 8.5 PC Control Series Command 8.5.1 CF_FSYNC COMMAND 8.5.2 CF_TDOTS COMMAND 8.5.3...
  • Page 4 8.7.8 CF_VSCALE COMMAND 8.7.9 CF_VPOS COMMAND 8.7.10 CF_HSCALE COMMAND 8.7.11 CF_HPOS COMMAND 8.8 Lamp Series Command 8.8.1 CF_LAMPH COMMAND 8.8.2 CF_LAMPMODE COMMAND 8.9 Sound Series Command 8.9.1 CF_VOLUME COMMAND 8.9.2 CF_MUTE COMMAND 8.9.3 CF_BLTINSP COMMAND 8.10 Setting Series Command 8.10.1 CF_VOLUME COMMAND 8.10.2 CF_DISP COMMAND 8.10.3 CF_LOGO COMMAND 8.10.4 CF_CF_CEIL COMMAND...
  • Page 5 9.4.9 CR_WBAL-B COMMAND 9.4.10 CR_COLTEMP COMMAND 9.4.11 CR_NZRED COMMAND 9.4.12 CR_PROGV COMMAND 9.4.13 CR_IMAGE COMMAND 9.4.14 CR_IMGGMD COMMAND 9.4.15 CR_APCTRL COMMAND 9.4.16 CR_TURBO COMMAND 9.5 Status Read Command 9.5.1 CR_FSYNC COMMAND 9.5.2 CR_TDOTS COMMAND 9.5.3 CR_CLAMP COMMAND 9.5.4 CR_H-POS COMMAND 9.5.5 CR_V-POS COMMAND 9.5.6...
  • Page 6 9.9 Status Read Command for LAMP 9.9.1 CR_LAMPREPL COMMAND 9.9.2 CR_LAMPMODE COMMAND 9.9.3 CR_PROJH COMMAND 9.10 Sound Series Status read Command 9.10.1 CR_VOLUME COMMAND 9.10.2 CR_MUTE COMMAND 9.10.3 CR_BLTINSP COMMAND 9.11 Status Read Command for Setting 9.11.1 CR_BBACK COMMAND 9.11.2 CR_DISP COMMAND 9.11.3 CR_LOGO COMMAND...
  • Page 7 1. OVERVIEW 1.1 This Functional Specification defines the Network Card and the communication functions for MR3P Series (1.3”XGA ‡ X -4 LV-7555). 1.2 A projector firmware Ver. 1.x -ready 1.3 Commands are to communicate to Network card, but most commands control a remote projector with PC installed RS232C.
  • Page 8 3. Note for Communications 3.1 The expand Command is defined one Command/one line that starts “C” and ends carriage return (0x0D). 3.2 When a projector receives carriage return (0x0D), it starts decoding. 3.3 There are two type of expand serial. Command and functional execution Commands and Status Read Command.
  • Page 9 The projector usuall issues a return commands in 1000 ms after receiving a return command. It takes more than 1000ms for some functional execution commands (CF) to send a return command as shown in the table below. COMMAND CONTENTS CF_IMAGE Select Image Mode CF_INPUT Select Input for Input...
  • Page 10 5. Functional Execution Command Table 5.1 Image Series Command Table Execute Command Item CF_BRIGHT_%1 [CR] Set Brightness value. CF_CONT_%1 [CR] Set Contrast value. CF_COLOR_%1 [CR] Set Color value. CF_TINT_%1 [CR] Set Tint value. CF_SHARP_%1 [CR] Set Sharpness value. CF_GAMMA_%1 [CR] Set Gamma value.
  • Page 11 5.4 Screen Series Command Table Execute Command Item CF_SCREEN_%1 [CR] Select Screen size. CF_FLSCREN_%1 [CR] Set or cancel for Full Screen. CF_TRUE_%1 [CR] Set or cancel for Screen True. CF_DZCENT_%1 [CR] Cancel digital zoom. CF_KEYSTONE_%1 [CR] Set Keystone. CF_KYSTNMODE_%1 [CR] Set Keystone store mode.
  • Page 12 6. Status Read Command Table 6.1 Image Series Status Read Command Table Status Read Command Item CR_BRIGHT [CR] Get Brightness CR_CONT [CR] Get Contrast CR_COLOR [CR] Get Color CR_TINT [CR] Get Tint CR_SHARP [CR] Get Sharpness CR_GAMMA [CR] Get Gamma CR_WBAL-R [CR] White Balance Red CR_WBAL-G [CR]...
  • Page 13 6.5 Status Read Command Table for Screen Status Read Command Item CR_FLSCREN [CR] Get Full Screen mode setting status CR_SCREEN [CR] Get selected screen size status CR_KYSTNMODE [CR] Get Keystone Store Mode setting status CR_ANAMORPHIC [CR] Get Anamorphicsettign status CR_VSCALE [CR] Get V Scale setting status CR_VPOS [CR] Get V Position setting status...

  • Page 14: Status Read Command

    6.10 Network Viewer Series Status Read Command Table Status Read Command Item CR_NETFUNC [CR] Get COMMAND about Network Manager 7. Error Code Table Error Code Content • H -When receives data that cannot be decoded -Parameter determination error(digit number error, and incorrect letter included) Normal Reception (not error) The function is not available in the selected mode.
  • Page 15 8.3 Operating Condition When the projector is in the following state, function execute Command will be limited. The functional execution Command is limited under the following state. State Read Commands are available under the following state. Projector State Valid Function Execute Command Stand-by mode C00:POWER ON C00:POWER ON...
  • Page 16 8.4.3 CF_COLOR COMMAND “CF_COLOR_%1”[CR] COMMAND “000-063”------ Directly select for color setting value “UP”---------------- Color setting value +1 “DN”---------------- Color setting value -1 Set the user control color value. The value set by this Command will not be saved to the projector. Details Therefore, when ALL OFF the projector, the value will return to the original setting.

  • Page 17: Cf_Gamma Command

    8.4.6 CF_GAMMA COMMAND “CF_GAMMA_%1”[CR] COMMAND “000-015”------ Directly select for Gamma setting value “UP”---------------- Current setting value +1 “DN”---------------- Current setting value-1 Set the User Control Gamma Value. The value set by this Command will not be saved to the projector. Details Therefore, when ALL OFF the projector, the value will return to the original setting.

  • Page 18: Cf_Nzred Command

    8.4.9 CF_NZRED COMMAND “CF_NZRED_%1”[CR] COMMAND “ON”------ Select Noise Reduction “OFF”---- Cancel Noise Reduction Set/Cancel Noise Reduction.(When it is in usual Power ON state, this is valid.) The value set by this Command will not be saved to the projector. Details Therefore, when ALL OFF the projector, the value will return to the original setting.

  • Page 19: Cf_Imageadj Command

    8.4.12 CF_IMAGEADJ COMMAND “CF_IMAGEADJ_%1”[CR] COMMAND “RST”------Reset Image adjustment “STR1”----Store current image adjustment to Custom Reset and store for image adjustment. (When it is in usual Power ON state, this is valid.) Details “STR1” execute image adjustment on OSD menu. The value set by this Command will be stored. Therefore, when projector POWER OFF, the value will return to the original setting.) Acceptable “000”[CR]...

  • Page 20: Cf_Turbo Command

    8.4.16 CF_TURBO COMMAND “CF_TURBO_%1”[CR] COMMAND “ON”---- Set Bright SW to ON. “OFF”-- Set Bright SW to OFF. Set Bright SW to the status by %1specification Details (Only valid when it is in the usual Power On state.) Acceptable “000”[CR] Response Unacceptable “Error Code”[CR] 8.5 PC Control Series COMMAND...

  • Page 21: Cf_Clamp Command

    8.5.3 CF_CLAMP COMMAND “CF_CLAMP_%1”[CR] COMMAND “0000-0127”---- Directly set Clamp setting value. “UP”------------------ Clamp setting value+1 “DN”------------------ Clamp setting value-1 Set Clamp of PC signal.(Only valid when it is in the usual Power On state.) The value set by this Command will not be saved to the projector.. Therefore, when ALL OFF the projector, the value will return to the original setting.

  • Page 22: Cf_V-Pos Command

    8.5.5 CF_V-POS COMMAND “CF_V-POS_%1”[CR] COMMAND “0000-nnnn”-- Directly set Vertical Position “nnnn” means maximum value. This value is from current Total Line value – display Line value. “UP”---------------- Vertical Position setting value +1. “DN”---------------- Vertical Position setting value-1. Set vertical position of PC signal. Only valid when it is in the usual Power On state.) The value set by this Command will not be saved to the projector.

  • Page 23: Cf_Dline Command

    8.5.7 CF_DLINE COMMAND “CF_DLINE_%1”[CR] COMMAND “0100-nnnn”-- directly specify Display Line value “nnnn” means maximum. This value is from current Total Line value – Vertical Position value. “UP”---------------- Display Line +1 “DN”---------------- Display Line -1 Set Display Line of PC signal (Only valid when it is in the usual Power On state.) The value set by this Command will not be saved to the projector.

  • Page 24: Cf_Orgmode Command

    8.5.9 CF_ORGMODE COMMAND “CF_ORGMODE_%1”[CR] COMMAND “XGA1”,”HDTV1080”...Etc After EXTn is set by PC Control Series Command and CF_SETPCADJ Details COMMAND such as CF_FSYNC / CF_TDOTS, this command select original signal. Acceptable “000”[CR] Response Unacceptable “101”[CR] ---- When Input is Video Series 8.5.10 CF_PCSTORE COMMAND “CF_PCSTORE_%1”[CR] COMMAND...

  • Page 25: Cf_Source Command

    8.6.2 CF_SOURCE COMMAND “CF_SOURCE_%1”[CR] COMMAND “DIGITAL”---- Select DVI input When Input “ANALOG”------ Select Analog input is 1 “SCART”-------- Select Scar input “HDCP”---------- Select DVI HDCP input “OUT”------------ Select Monitor Out When Input “VIDEO”-------- Select composite video and video input is 2 “YPBPR”-------- Select Y/Pb/Pr “ANALOG”--------- Select RGB “VIDEO”-------- Select composite video and video input...

  • Page 26: Cf_Input3 Command

    8.6.5 CF_INPUT3 COMMAND “CF_INPUT3_%1”[CR] COMMAND “VIDEO”-------- Select Composite Video Input “S-VIDEO”---- Select S-Video input “YPBPR”-------- Select Y/Pb/Pr Select Input-3 and specified source by %1. Details (Only valid when it is in the usual Power On state.) Acceptable “000”[CR] Response Unacceptable “%%%”[CR] 8.6.6 CF_INPUT4 COMMAND...

  • Page 27: Cf_Screen Command

    available only when Input is Y, Pb/Cb, Pr/Cr. Acceptable “000”[CR] Response Unacceptable “Error Code”[CR] 8.7 Screen Control Series COMMAND 8.7.1 CF_SCREEN COMMAND “CF_SCREEN_%1”[CR] COMMAND “WIDE” -------- Select 16:9 Input is “TRUE” -------- Select True size computer “DZOOM UP”-- Zoom Out with Digital zoom “DZOOM DN”-- Zoom in with Digital zoom Input is “NORMAL”...

  • Page 28: Cf_True Command

    8.7.3 CF_TRUE COMMAND “CF_TRUE_%1”[CR] COMMAND “ON”------ Select True “OFF”---- Cancel True Set/cancel True Details Only valid when it is in the usual Power On state and input is computer. Acceptable “000”[CR] Response Unacceptable “101”[CR] ---- When Input is Video Series 8.7.4 CF_DZCENT COMMAND “CF_DZCNENT_%1”[CR]...

  • Page 29: Cf_Kystnmode Command

    8.7.6 CF_KYSTNMODE COMMAND “CF_KYSTONMODE_%1”[CR] COMMAND “STR”------ Set Keystone store mode to Store “RST” ----- Set Keystone store mode to Reset Details Set Keystone store mode(Only valid when it is in the usual Power On state) Acceptable “000”[CR] Response Unacceptable “Error Code”[CR] 8.7.7 CF_ ANAMORPHIC COMMAND “CF_ANAMORPHIC_%1”[CR]...

  • Page 30: Cf_Vpos Command

    8.7.9 CF_VPOS COMMAND “CF_VPOS_%1”[CR] COMMAND “064”--- +64 “063”--- +63 “002”--- +2 “001”--- +1 “000”--- • } 0 “-01”--- -1 “-02”--- -2 “-63”--- -63 “-64”--- -64 Details Set V Position. (Only valid when it is in the usual Power On state.) Acceptable “000”[CR] Response...

  • Page 31: Cf_Lampmode Command

    8.8.2 CF_LAMPMODE COMMAND “CF_LAMPMODE_%1”[CR] COMMAND “NORMAL”-- Set lamp to normal mode “ECO”-------- Set lamp to silent mode. “AUTO”------ Set lamp to auto mode Select lamp mode. (Only valid when it is in the usual Power On state.) Details The value set is stored in EEPROM. When ALL OFF the projector, the value will return to the original setting.

  • Page 32: Cf_Bltinsp Command

    8.9.3 CF_BLTINSP COMMAND “CF_BLTINSP_%1”[CR] COMMAND “ON”------ Select Built-in Speaker “OFF”---- Cancel Boiling Speaker Set/Cancel Built-in Speaker. (Only valid when it is in the usual Power On Details state.) Acceptable “000”[CR] Response Unacceptable “Error Code”[CR] 8.10 Setting Series COMMAND 8.10.1 CF_BBACK COMMAND “CF_BBACK_%1”[CR] COMMAND “ON”------ Select Blue Back...

  • Page 33: Cf_Rear Command

    8.10.4 CF_CEIL COMMAND “CF_CEIL_%1”[CR] COMMAND “ON”------ Select Ceiling “OFF”---- Cancel Ceiling Set/Cancel Ceiling (Only valid when it is in the usual Power On state.) Details The value set is stored in EEPROM. When ALL OFF the projector, the value will return to the original setting. Acceptable “000”[CR] Response...

  • Page 34: Cf_Lang Command

    8.10.7 CF_LANG COMMAND “CF_LANG_%1”[CR] COMMAND “ENG”---- Select English “DEU”---- Select German “FRA”---- Select French “ITA”---- Select Italy “ESP”---- Select Spanish “POR”---- Select Portuguese “NED”---- Select Dutch “SVE”---- Select Swedish “JPN”---- Select Japanese “CHI”---- Select Chinese “KOR”---- Select Korean “RUS”---- Select Russian Set OSD language.

  • Page 35: Cf_Fanspeed Command

    8.10.10 CF_P-MANETIME COMMAND “CF_P-MANETIME_%1”[CR] COMMAND “01”-”30”-- Directly set the time by the minute “UP”------------ Set the time 1 minute longer “DN”------------ Set the time 1 minute shorter Set Power management time. (Only valid when it is in the usual Power On state.) Details The value set is stored in EEPROM.

  • Page 36: Cr_Bright Command

    Status Read Command 9.1 Format 1. PC issues Commands as below. “CR_ COMMAND”[CR] COMMAND:character line When projector receives the appropriate Command, it returns a character line as the required data. “000_”%1 [CR] %1:Required Data(character line) When receiving data cannot be decode, the projector returns”• H ”• m CR• n 9.2 Transfer Example Get total dots of projector by expand Commands PJ :”CR•...

  • Page 37: Cr_Color Command

    9.4.3 CR_COLOR COMMAND “CR_COLOR”[CR] COMMAND Details Get Color value of user control Acceptable “000_%1”[CR] Response “000”-”063” “• H ”[CR] Unacceptable 9.4.4 CR_TINT COMMAND “CR_TINT”[CR] COMMAND Details Get Tint value of user control Acceptable “000_%1”[CR] “000”-”063” Response “Error Code”[CR] --- invalid Unacceptable “•...

  • Page 38: Cr_Wbal-G Command

    9.4.8 CR_WBAL-G COMMAND “CR_WBAL-G”[CR] COMMAND Details Get White Balance Green of user control Acceptable “000_%1”[CR] Response “000”-”063” “• H ”[CR] Unacceptable 9.4.9 CR_WBAL-B COMMAND “CR_WBAL-B”[CR] COMMAND Details Get White Balance Blue of user control Acceptable “000_%1”[CR] Response “000”-”063” Unacceptable “• H ”[CR] 9.4.10 CR_COLTEMP COMMAND “CR_COLTEMP”[CR] COMMAND...

  • Page 39: Cr_Apctrl Command

    9.4.12 CR_PROGV COMMAND “CR_PROGV”[CR] COMMAND Details Get Progressive setting status. Acceptable “000_%1”[CR] “L1”----- Progressive Mode L1 setting Response “L2”----- Progressive Mode L2settiing “OFF”--- Progressive cancellation “• H ”[CR] Unacceptable 9.4.13 CR_IMAGE COMMAND “CR_IMAGE”[CR] COMMAND Details Get image setting status Acceptable “000_%1”[CR] “STAND”------ Standard High contrast...

  • Page 40: Cr_Turbo Command

    9.4.16 CR_TURBO COMMAND “CR_TURBO”[CR] COMMAND Details Get Bright SW setting status Acceptable “000_%1”[CR] “ON”---- Bright SW is ON Response “OFF”-- Bright SW is OFF Unacceptable “• H ”[CR] 9.5 STATUS READ COMMAND FOR PC 9.5.1 CR_FSYNC COMMAND “CR_FSYNC”[CR] COMMAND Details Get Fine Sync value Acceptable “000_%1”[CR]...

  • Page 41: Cr_H-Pos Command

    9.5.4 CR_H-POS COMMAND “CR_H-POS”[CR] COMMAND Details Get Horizontal position value Acceptable “000_%1”[CR] “0000”-”nnnn” Response (nnnn = Total Dots - Display Dots) “Error Code”[CR] --- Invalid Unacceptable “• H ”[CR] ------------- When receives unclear Command 9.5.5 CR_V-POS COMMAND “CR_V-POS”[CR] COMMAND Details Get Vertical position value.

  • Page 42: Cr_Orgmode Command

    9.5.8 CR_ORGMODE COMMAND “CR_ORGMODE”[CR] COMMAND Get signal for MODE in PC Adjust Details When MODE1-MODE5 or EXT6-EXT60 are not selected, get current signal. Acceptable “000_%1”[CR] “XGA1” Response “HDTV1080”...Etc “• H ”[CR] Unacceptable 9.5.9 CR_PCSTORE COMMAND “CR_PCSTORE”[CR] COMMAND Get the status if MODE1-MODE5 is Free or Stored for PC Adjust. Details Each data MODE1-MODE5 will be shown in 5 bytes.

  • Page 43: Status Read Command For Video

    9.6 STATUS READ COMMAND FOR VIDEO 9.6.1 CR_SERSYS COMMAND “CR_SERSYS”[CR] COMMAND Select selected signal. Details When Auto mode, it returns by auto-detect. Only available when Input is video. (Unavailable when Input is computer.) Acceptable “000_%1”[CR] “1080I60”-- 1080i 60Hz “1080I50”-- 1080i 50Hz “1035I”------ 1035i “720P”-------- 720p “575P”-------- 575p...

  • Page 44: Cr_Srcinp1Command

    9.7.3 CR_SRCINP1COMMAND “CR_SRCINP1”[CR] COMMAND Details Get INPUT 1 Source. Acceptable “000_%1”[CR] “DIGITAL”-- DVI mode status “ANALOG”---- Analog RGBmode status Required Response “SCART”------ Scart mode status Data “HDCP”-------- HDCP mode status “OUT”---------- Monitor OUT mode status Unacceptable “• H ”[CR] 9.7.4 CR_SRCINP2 COMMAND “CR_SRCINP2”[CR] COMMAND...

  • Page 45: Cr_System Command

    9.7.7 CR_SYSTEM COMMAND “CR_SYSTEM”[CR] COMMAND Details Get selected System Acceptable “000_%1”[CR] “MODE1” When “MODE2” Input “MODE3” is PC “MODE4” Series “MODE5” “AUTO” ------- Auto is selected. “NTSC” ------- NTSC is selected. “NTSC443”-- NTSC4.43 is selected. “PAL” --------- PAL is selected. Response “SECAM”...

  • Page 46: Cr_Kystnmode Command

    9.8.3 CR_ KYSTNMODE COMMAND “CR_KYSTONMODE”[CR] COMMAND Details Get Keystone Store Mode setting status Acceptable “000_%1”[CR] “STR”-- “Store Mode” is Store Response “RST”-- “Store Mode” is Reset Unacceptable “• H ”[CR] ------------ COMMAND 9.8.4 CR_ANAMORPHIC COMMAND “CR_ANAMORPHIC”[CR] COMMAND Details Get Anamorphic setting status Acceptable “000_%1”[CR] “ON”---- Anamorphic is ON...

  • Page 47: Cr_Hpos Command

    9.8.8 CR_HPOS COMMAND “CR_HPOS”[CR] COMMAND Details Get H Position setting status Acceptable “000_%1”[CR] Response “-64”-”064” “• H ”[CR] Unacceptable 9.9 STATUS READ COMMAND FOR LAMP 9.9.1 CR_LAMPREPL COMMAND “CR_LAMPREPL”[CR] COMMAND Details Get lamp replacement time information Acceptable “000_%1”[CR] “1Y”-- over the lamp replacement time Response “1N”-- haven not reached the lamp replacement time Unacceptable...

  • Page 48: Cr_Volume Command

    9.10 Sound Series Status Read COMMAND 9.10.1 CR_VOLUME COMMAND “CR_VOLUME”[CR] COMMAND Details Get user control Volume Acceptable “000_%1”[CR] Response “000”-”063” Unacceptable “• H ”[CR] 9.10.2 CR_MUTE COMMAND “CR_MUTE”[CR] COMMAND Details Get sound mute setting value Acceptable “000_%1”[CR] “ON”---- Sound mute is ON Response “OFF”-- Sound mute is OFF “•...

  • Page 49: Cr_Disp Command

    9.11.2 CR_DISP COMMAND “CR_DISP”[CR] COMMAND Details Get Display setting status Acceptable “000_%1”[CR] “ON”----- Set Display Response “OFF”--- Cancel Display Unacceptable “• H ”[CR] 9.11.3 CR_LOGO COMMAND “CR_LOGO”[CR] COMMAND Details Get Logo setting status Acceptable “000_%1”[CR] “ON”----- Set Logo Response “OFF”--- Cancel Logo Unacceptable “•...

  • Page 50: Cr_On-Sta Command

    9.11.6 CR_ON-STA COMMAND “CR_ON-STA”[CR] COMMAND Details Get Power ON Start setting status Acceptable “000_%1”[CR] “ON”• • Set Power ON Start Response “OFF”• • Cancel Power ON Start “• H ”[CR] Unacceptable 9.11.7 CR_P-MANE COMMAND “CR_P-MANE”[CR] COMMAND Details Get Power management setting status Acceptable “000_%1”[CR] “OFF”------------ Cancel Power management...

  • Page 51: Other Status Read Command

    9.11.10 CR_KEYDIS COMMAND “CR_KEYDIS”[CR] COMMAND Details Get RC/KEY status Acceptable “000_%1”[CR] “N/A”• • Both RC & KEY are available. Response “RC” • • RC is locked “KEY” • • KEY is locked Unacceptable “• H ”[CR] 9.12 Other Status Read COMMAND 9.12.1 CR_SIGNAL COMMAND “CR_SOGNAL”[CR] COMMAND...

  • Page 52: Cr_Ptimer Command

    9.12.4 CR_PTIMER COMMAND “CR_PTIMER”[CR] COMMAND Details Get Presentation Timer status Acceptable “000_%1”[CR] “ON”------- Presentation timer is active Response “STOP”--- Presentation timer is pause “OFF”----- Presentation timer is inactive “• H ”[CR] Unacceptable 9.12.5 CR_INFPFAIL COMMAND “CR_INFPFAIL”[CR] COMMAND Get the power failure status. Data is shown in 32bits HEX Details Normal•...

  • Page 53: Cr_Tempfail Command

    9.12.7 CR_TEMPFAIL COMMAND “CR_TEMPFAIL”[CR] COMMAND Get the temperature inside a projector. Details When some temperature sensors are installed in the projector, it is possible to know the temperature all at once. Acceptable “000_%1_%2_%3”[CR] %1• • T emperature, sensor 1 %2• • T emperature, sensor 2 %3•...

Table of Contents