Cr_H-Pos Command; Cr_V-Pos Command; Cr_Ddots Command; Cr_Dline Command - Canon LV-7575 Specifications

LV-7575 Expand Serial Command Functional Specifications

9.5.4 CR_H-POS Command

Command "CR_H-POS" [CR]
Details Get value of Horizontal Position
Acceptable
%1
Response
Unacceptable

9.5.5 CR_V-POS Command

Command "CR_V-POS" [CR]
Details Get value of Vertical Position
Acceptable
%1
Response
Unacceptable

9.5.6 CR_DDOTS Command

Command "CR_DDOTS" [CR]
Details Get value of Display Dots
Acceptable
%1
Response
Unacceptable

9.5.7 CR_DLINE Command

Command "CR_DLINE" [CR]
Details Get value of Display Line
Acceptable
%1
Response
Unacceptable
"000_%1" [CR]
"0000 – nnnn"
(nnnn = Total Dots – Display area H)
"Error Code" [CR] ------ When command is not available in the
given condition (such as being selected input
"?" [CR] ------------------- When unknown command is received
"000_%1" [CR]
"0000 – nnnn"
(nnnn = Total Line – Display area V)
"Error Code" [CR] ------ When command is not available in the
given condition (such as being selected input
"?" [CR] --------------------- When unknown command is received
"000_%1" [CR]
"0100 – nnnn"
(nnnn = Total Dots – Position H)
"Error Code" [CR] ---- When command is not available in the
given condition (such as being selected input
"?" [CR] -------------------- When unknown command is received
"000_%1" [CR]
"0100 – nnnn"
(nnnn = Total Line – Position V)
"Error Code" [CR] ---- When command is not available in the
given condition (such as being selected input)
"?" [CR] -------------------- When unknown command is received
43/71