D Status Read Command Table; Image Status Read Command Table; Pc Adjust Status Read Command Table; Video Status Read Command Table - Canon LV-7575 Specifications

LV-7575 Expand Serial Command Functional Specifications
6• D Status Read Command Table

6.1 Image Status Read Command Table

Status Read command
CR_BRIGHT [CR]
CR_CONT [CR]
CR_COLOR [CR]
CR_TINT [CR]
CR_SHARP [CR]
CR_GAMMA [CR]
CR_WBAL-R [CR]
CR_WBAL-G [CR]
CR_WBAL-B [CR]
CR_COLTEMP [CR]
CR_NZRED [CR]
CR_PROGV [CR]
CR_IMAGE [CR]
CR_IMGGMD [CR]
CR_APCTRL [CR]

6.2 PC Adjust Status Read Command Table

Status Read command
CR_FSYNC [CR]
CR_TDOTS [CR]
CR_CLPPHASE [CR]
CR_CLPWIDTH [CR]
CR_H-POS [CR]
CR_V-POS [CR]
CR_DDOTS [CR]
CR_DLINE [CR]
CR_ORGMODE [CR]
CR_PCSTORE [CR]
CR_SETPCADJ [CR]

6.3 Video Status Read Command Table

Status Read command
CR_SERSYS [CR]
Get value of Brightness
Get value of Contrast
Get value of Color
Get value of Tint
Get value of Sharpness
Get value of Gamma
Get Red value of White Balance
Get Green value of White Balance
Get Blue value of White Balance
Get value of Color temperature
Get setting status of Noise reduction
Get setting status of Progressive scan
Get Selected Image status
Get setting value of Image Gamma
Get setting status of Auto Picture Control
Get setting value of Fine Sync
Get setting value of Total Dots
Get setting value of Clamp phase
Get setting value of Clamp width
Get setting value of Horizontal Position
Get setting value of Vertical Position
Get setting value of Display Dots
Get setting value of Display Line
Get the original signal for PC-Adjusted mode
Get status Free/ Stored for PC Adj. mode 1-10
Get currently displayed PC signal in system
Get currently selected signal. In Auto mode, it returns a
result by Auto detection.
Item
Item
Item
13/71