Cf_Pjpincode Command; Other Commands; Cf_Keyemu Command; Cf_Menu Command - Canon LV-7575 Specifications

LV-7575 Expand Serial Command Functional Specifications

8.10.14 CF_PJPINCODE Command

Command "CF_PJPINCODE_%1" [CR]
%1 "0000 – 9999" ------------- Directly specify PJ PIN code
Enter PIN code to cancel PIN code lock (Available only in the normal Power ON
status)
PIN code can not be changed. (Only PIN code lock is canceled.)
*When PIN code Lock is enabled:
PIN code is matched ------------------------- Command is valid (Acceptable)
PIN code is mismatched -------------------- Command is invalid (Error code "102")
PIN code is beyond %1 available range ------------ Command is invalid (Error
code "?")
Details
When PIN code lock is canceled:
PIN code is within %1 range ----------- Command is valid (Acceptable)
PIN code is out of %1 range ----------- Command is invalid (Error code is 102)
This command is only valid when "PJ PIN code" dialog is displayed to enter PIN
code after Power is ON and Countdown is completed.
When PIN code lock is set to "On1", it needs to send this command every time
the projector is turned on.
Acceptable
Response
Unacceptable

8.11 Other Commands

8.11.1 CF_KEYEMU Command

Command "CF_KEYEMU_%1" [CR]
"RIGHT" ---------------- Move Pointer rightward in On-Screen Display Menu
"LEFT" ------------------ Move Pointer leftward in On-Screen Display Menu
"UP" ---------------------- Move Pointer to upward On-Screen Display Menu
"DN" --------------------- Move Pointer to downward in On-Screen Display Menu
%1 "SELECT" -------------- The same operation as "SELECT" button of RC
"AUTOPC" ------------- Execute Auto PC Adj. operation
Details The same operation as RC/Control Key.
Acceptable
Response
Unacceptable

8.11.2 CF_MENU Command

Command "CF_MENU_%1" [CR]
"ON" --------------------- Display On-Screen Display Menu
%1
"OFF" -------------------- Hide On-Screen Display Menu
Set On-Screen Display mode.
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
The same operation as "AUTO PC" button of RC
When this is sent during Auto PC Adj. operation, the operation is
stopped. This is same way as pressing "AUTO PC" button of RC.
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
37/71