Cr_Pressure Command; Cr_Signal Command; Cr_Vmute Command; Cr_Freeze Command - Canon LV-7575 Specifications

LV-7575 Expand Serial Command Functional Specifications
Unacceptable

9.12.2 CR_PRESSURE Command

Command "CR_PRESSURE" [CR]
Get value from Air Pressure sensor.
Fllowing is the formula to work out Air Pressure from the given value ("Vn"
represents the value):
Details
Obtains accuracy of +/- 2%
Acceptable
Response
Unacceptable

9.12.3 CR_SIGNAL Command

Command "CR_SIGNAL" [CR]
Details Get status whether there is any signal or not.
Acceptable
Response
Unacceptable

9.12.4 CR_VMUTE Command

Command "CR_VMUTE" [CR]
Details Get setting status of No Show.
Acceptable
Response
Unacceptable

9.12.5 CR_FREEZE Command

Command "CR_FREEZE" [CR]
Details Get setting status of Freeze.
Acceptable
Response
Unacceptable
"Error Code" [CR]
Air Pressure (hPa) =• i 5*Vn / 1024 – 0.204• j / 0.00459 + 150
"000_%1" [CR]
%1 "0000" – "1023"
"Error Code" [CR]
"000_%1" [CR]
"ON" -------------------------- There is signal
%1
"OFF" ------------------------- There is no signal
"?" [CR]
"000_%1" [CR]
"ON" -------------------------- No show is enabled
%1
"OFF" ------------------------ No show is disabled
"?" [CR]
"000_%1" [CR]
"ON" ---------------------------- Freeze is enabled
%1
"OFF" -------------------------- Freeze is disabled
"?" [CR]
58/71