Cf_Ceil Command; Cf_Rear Command; Cf_Rcode Command - Canon LV-7575 Specifications

LV-7575 Expand Serial Command Functional Specifications

8.10.4 CF_CEIL Command

Command "CF_CEIL_%1" [CR]
"ON" --------------------------- Set Ceiling to ON.
%1
"OFF" ------------------------- Set Ceiling to OFF.
Set/Cancel Ceiling mode.(Available only in the normal Power ON status)
Details The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable

8.10.5 CF_REAR Command

Command "CF_REAR_%1" [CR]
"ON" --------------------------- Set Rear to ON.
%1
"OFF" ------------------------- Setl Rear to OFF.
Set/Cancel Rear mode (Available only in the normal Power ON status)
When Rear is ON, projected image is left/right reversed.
Details
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable

8.10.6 CF_RCODE Command

Command "CF_RCODE_%1" [CR]
"001" ------------------------------------ Select Code 1
"002" ------------------------------------ Select Code 2
"003" ------------------------------------ Select Code 3
"004" ------------------------------------ Select Code 4
"005" ------------------------------------ Select Code 5
%1
"006" ------------------------------------ Select Code 6
"007" ------------------------------------ Select Code 7
"008" ------------------------------------ Select Code 8
"UP" ---------- Switch forward (Code1→Code2→Code3 - - - →Code8→Code1)
"DN" --------- Switch backward (Code8→Code7→Code6 - - -→Code1→Code8)
Select Code of Remote Control (Available only in the normal Power ON status)
Details The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
34/71