Finishing; Sort/Group; Offset; Staple - Konica Minolta bizhub 361 Function Manual

Use Document
6.3.3

Finishing

!
Detail
The feeding method when a finisher is installed can be changed from Administrator Setting. For details
on the offset function, refer to the User's Guide [Copy Operations].
The [Replace Staples] key is available only if optional Finisher FS-522 is installed.

Sort/Group

Selecting "Sort" feeds out the document by copies.
Selecting "Group" feeds out the document by pages.

Offset

Specifies offset to separate the copies or pages of the document. If a finisher is installed, the printed pages
are fed out with each copy shifted to separate it.
If no finisher is installed, the printed pages are fed out sorted in an alternating crisscross pattern.

Staple

The display is made when the finisher is installed optionally. Selects one of these settings to bind copies with
a staple in the corner or with two staples.

Staple - Position Setting

When you select a staple type, you can specify the position.

Punch

The display is made when the finisher optionally installed is provided with a punch kit. Selects the setting to
punch holes for filing.
501/421/361
6
6-6