Use Document
6.5.23
Communication Settings - Digital Signature
This parameter appears when "S/MIME Communication Settings" (under "E-Mail Settings" under "Network
Setting" under "Administrator Setting") is set to "ON". Specifies whether or not to add a digital signature to
E-Mail messages for transmission.
!
Detail
This parameter may not be available or may be set to normally sign, depending on the specified S/MIME
communication settings.
Note
For details on the S/MIME communication settings, refer to the User's Guide [Network Administrator].
6.5.24
Communication Settings - Fax Header Settings
Specifies whether or not to add sender information for transmission. Select one from the list of sender names.
!
Detail
Use "TTI Setting" in the Utility to register the detail added to the original as sender information. For
details, refer to the User's Guide [Network Scan/Fax/Network Fax Operations].
Use "TTI/RTI" in the Utility to register how to add sender information. For details, refer to the User's
Guide [Network Scan/Fax/Network Fax Operations].
6.5.25
Overview of Application
Other settings (Stamp/Composition, Send & Print) specifiable at transmission can be specified here.
6.5.26
Application - Stamp/Composition - Date/Time
For the setting procedure, refer to
6.5.27
Application - Stamp/Composition - Page Number
For the setting procedure, refer to
501/421/361
"Stamp/Composition - Date/Time" on page
"Stamp/Composition - Page Number" on page 6-15
6
6-14.
6-45