Check Dest. & Send; Select Line; Communication Settings - E-Mail Settings; About E-Mail Settings - Konica Minolta bizhub 361 Function Manual

Use Document
Check Dest. & Send
A Fax is sent only after a comparison of the specified Fax number with the Fax number information (CSI) for
the recipient's machine indicates a match. This prevents misdirected transmissions since a transmission
error occurs if the numbers do not match.
!
Detail
[Check Dest. & Send] requires that the destination has its fax number registered.

Select Line

Select "Line 1" or "Line 2" to send a fax if a fax multi line is installed. Specify a line for transmission.
When "Unset" is chosen in Select Line, transmit using the line which is then vacant among Line 1 or Line 2.
When the Line 1 and the Line 2 are both vacant, priority is given to the Line 1.
!
Detail
You cannot specify a line when "Line 2 Setting" of "Multi Line Setting" is set to "RX Only".
When two lines are used separately as an outside line and an extension, be sure to specify a line to be
used. Selecting [Unset] may result in an incorrect transmission.
6.5.19

Communication Settings - E-Mail Settings

About E-Mail Settings

Specifies the document name, subject, From address and message body for sending E-Mails.

Document Name

Displays the name of the file to be saved. The document name specified later appears as the document
name, even if the document name was specified in the File Document screen. You can enter up to 30
characters.

Subject

The text specified in Utility mode is automatically displayed. Press [Direct Input] to change the text. You can
enter up to 64 characters.
501/421/361
6
6-41