San Pilot And Efcm Zone Screens - HP AE370A - Brocade 4Gb SAN Switch 4/12 Administrator's Manual

To prepare the McDATA fabric
1. Log in to SAN Pilot or basic EFC Manager depending upon the firmware release.
From the SAN Pilot left navigation menu, select Configure.
2.
Select the Zoning tab, then select the Zones tab. (select Configure > Zoning on EFCM).
3.
Figure 13

SAN Pilot and EFCM zone screens

NOTE: The screens provided in this section are for illustrative purposes only. Depending on the McDATA
firmware release you are using, the McDATA web-based management tool may display a user interface
different from those shown. Additionally, HP M-Series fabrics are supported with HAFM (High Availability
Fabric Manager) which utilizes similar functionality and user interfaces.
Type the desired name in the Zone Name field, using the LSAN_xxxx naming schema.
4.
In EFCM, move to the Zone Name field, and enter the desired name using the LSAN_xxxx naming
schema.
Fabric OS 5.2.x administrator guide 233