HP AE370A - Brocade 4Gb SAN Switch 4/12 Administrator's Manual page 195

SAN Director 2/128 and 4/256 SAN Director: Use the following syntax:
slot
urouteshow [
The following entries appear:
• Local Domain—Domain number of the local switch.
• In Ports—Port from which a frame is received.
• Domain—Destination domain of the incoming frame.
• Out Port—The port to which the incoming frame will be forwarded in order to reach the
destination domain.
• Name—The name of the destination switch.
• Path Count—The number of currently active paths to the destination domain
• Hops—The maximum number of switch-to-switch links (ISLs) transversed to reach the destination
domain.
• Flags—Indicates if the route is dynamic (D) or static (S). A static route is assigned using the
command uRouteConfig.
• Next (Dom, Port)Domain number and port number of the next hop.
The following example displays the routing information of all the active ports:
:
switch:admin> urouteshow
Local Domain ID: 1
In Port Domain
----------------------------------------------------------------------------
14 4
switch:admin>
The next example displays the routing information for port 1 1 on slot 1:
switch:admin> urouteshow 1/11
Local Domain ID: 3
In Port Domain
----------------------------------------------------------------------------
11 2
4 16
This example displays the routing information of port 1 1 to domain 4 only:
switch:admin> urouteshow 1/11, 4
Local Domain ID: 3
In Port Domain
----------------------------------------------------------------------------
11 4
portnumber domainnumber
/][ ][,
Out Port Metric
9 500
Out Port Metric
0 1500
500 1
Out Port Metric
16 500
]
Hops Flags Next (Dom, Port)
1 D
Hops Flags Next (Dom, Port)
2 D 4,0
D 4,0
Hops Flags Next (Dom, Port)
1 D 4,0
Fabric OS 5.2.x administrator guide 195
4,24