Security Considerations; Troubleshooting Configuration Download; Messages Captured In The Logs - HP AE370A - Brocade 4Gb SAN Switch 4/12 Administrator's Manual

Hp storageworks fabric os 5.2.x administrator guide (5697-0014, may 2009)
Hide thumbs Also See for AE370A - Brocade 4Gb SAN Switch 4/12:
Table of Contents

Advertisement

NOTE:
Because some configuration parameters require a reboot to take effect, after you download a
configuration file you must reboot to be sure that the parameters are enabled. Before the reboot, this type
of parameter is listed in the configuration file, but it is not effective until after the reboot.

Security considerations

Security parameters and the switch's identity cannot be changed by configDownload. Parameters such
as the switch's name and IP address (lines in the configuration file that begin with "boot") are ignored.
Security parameters (lines in the configuration file that begin with "sec"), such as secure mode setting and
version stamp, are ignored.
For more detailed information on security, see

Troubleshooting configuration download

If the configuration download fails, check that these conditions are true:
If you did not disable the switch, you must do so for some configuration downloads (see
download without disabling a
The host name is known to the switch.
The host IP address can be contacted.
You have permission on the host to perform configuration download.
The configuration file you are trying to download exists on the host.
The configuration file you are trying to download is a switch configuration file.
If you selected the (default) FTP protocol, the FTP server is running on the host;
The configuration file uses correct syntax.
If for some reason the switch reboots during the configuration download, issue the command again.
There may be some restrictions if you are using Admin Domains. See
on page 157 for details.

Messages captured in the logs

Configuration download generates both RAS log and Audit log messages resulting from execution of the
configDownload command.
The following messages are written to the logs:
configDownload completed successfully ... (RAS and Audit log)
configUpload completed successfully ... (RAS log)
configDownload not permitted ... (Audit log)
configUpload not permitted ... (RAS log)
(Warning) Downloading configuration without disabling the switch was unsuccessful. (Audit log)
"Configuring standard security
switch" on page 120).
features" on page 1 13.
"Configuration
"Managing administrative
Fabric OS 5.2.x administrator guide 121
domains"

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents