Ficon Commands - HP AE370A - Brocade 4Gb SAN Switch 4/12 Administrator's Manual

FICON commands

Table 53 summarizes the Fabric OS CLI commands that can be used for managing FICON fabrics. For
detailed information on these commands, refer to the Fabric OS Command Reference Manual.
Table 53 Fabric OS commands related to FICON and FICON CUP
Command
Standard Fabric OS commands:
configure
portSwap
portSwapDisable
portSwapEnable
portSwapShow
Commands specific to FICON:
ficonclear rlir
ficonclear rnid
ficonshow ilir
[fabric]
ficonshow lirr
[fabric]
ficonshow rlir
[fabric]
ficonshow rnid
[fabric]
ficonshow
switchrnid
[fabric]
Commands specific to FICON CUP:
ficoncupset
fmsmode
ficoncupset
modereg
ficoncupshow
fmsmode
ficoncupshow
modereg
242 Administering FICON fabrics
Description
Sets the domain ID and the insistent domain ID mode.
Swaps ports.
Disables the portSwap command.
Enables the portSwap command.
Displays information about swapped ports.
Removes all RLIR records from the local RLIR database.
Removes all outdated RNID records from the local RNID database.
Displays FRU failure information on the local switch or on the
fabric.
Displays registered listeners for link incidents for the local switch or
for the fabric.
Displays link incidents for the local switch or for the fabric.
Displays node identification data for all devices registered with the
local switch or all devices registered with all switches defined in the
fabric.
Displays node identification data for the local switch or for the
fabric.
Sets FICON Management Server mode on or off for the switch.
Sets the mode register bits for the switch.
Displays the FICON Management Server mode setting for the
switch.
Displays the mode register bit settings for the switch.