HP AE370A - Brocade 4Gb SAN Switch 4/12 Administrator's Manual page 100

Sample modification of the options for configuring SNMP MIB traps
switch:admin> snmpmibcapset
The SNMP Mib/Trap Capability has been set to support
FE-MIB
SW-MIB
FA-MIB
FA-TRAP
FA-MIB (yes, y, no, n): [yes]
FICON-MIB (yes, y, no, n): [no] y
HA-MIB (yes, y, no, n): [no] y
SW-TRAP (yes, y, no, n): [no] y
swFCPortScn (yes, y, no, n): [no]
swEventTrap (yes, y, no, n): [no]
swFabricWatchTrap (yes, y, no, n): [no]
swTrackChangesTrap (yes, y, no, n): [no]
FA-TRAP (yes, y, no, n): [yes]
connUnitStatusChange (yes, y, no, n): [no]
connUnitEventTrap (yes, y, no, n): [no]
connUnitSensorStatusChange (yes, y, no, n): [no]
connUnitPortStatusChange (yes, y, no, n): [no]
SW-EXTTRAP (yes, y, no, n): [no] y
FICON-TRAP (yes, y, no, n): [no] y
linkRNIDDeviceRegistration (yes, y, no, n): [no]
linkRNIDDeviceDeRegistration (yes, y, no, n): [no]
linkLIRRListenerAdded (yes, y, no, n): [no]
linkLIRRListenerRemoved (yes, y, no, n): [no]
linkRLIRFailureIncident (yes, y, no, n): [no]
HA-TRAP (yes, y, no, n): [no] y
fruStatusChanged (yes, y, no, n): [no]
cpStatusChanged (yes, y, no, n): [no]
fruHistoryTrap (yes, y, no, n): [no]
Avoid-Duplicate-TRAP (yes, y, no, n): [no] y
switch:admin>
The following snmpMibCapSet parameters for FA-TRAP appear in the preceding example:
• connUnitStatusChange indicates that the overall status of the connectivity unit has changed. Its
variables are:
• connUnitStatus: the status of the connection unit
• connUnitState: the state of the connection unit
• connUnitEventTrap indicates that the connectivity unit has generated an event. Its variables are:
• connUnitEventId: the internal event ID
• connUnitEventType: the type of this event
• connUnitEventObject is used with the connUnitEventType to identify the object to which the
event refers.
• connUnitEventDescr is the description of the event.
• connUnitSensorStatusChange indicates that the status of the sensor associated with the
connectivity unit has changed.
• connUnitSensorStatus is the status indicated by the sensor.
• connUnitPortStatusChange indicates that the status of the sensor associated with the connectivity
unit has changed.
• connUnitPortStatus shows overall protocol status for the port.
• connUnitPortState shows the user-specified state of the port hardware.
100 Configuring standard security features