Leds On The Power Supply Side - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Quick Start Manual

LEDs on the Power Supply Side

30
The following table describes the LEDs below the serial port. These LEDs
indicate the switch power.
Color of LED Status of Hardware
No light Either the switch is off, or boot
is not complete, or boot has
failed.
Steady green Switch is on and boot has
successfully completed.
Slow-flashing Diagnostic failure on one or
green more ports.
Figure 13 shows the power supply side of the switch with the LEDs
identified.
Power Supply LED (2x)
AC Power Switch (2x)
Power Supply #2
(containing
Figure 13. The Power Supply Side of the FC 16B
Switch Status LED
Spring Latch (2x)
Fan Tray Assembly
fans #3 and 4)
Recommended Action
Verify that the switch
is on and boot has had
time to complete. If
there is still no light,
contact HP support.
No action required.
Errors may be listed
in the error log. Refer
to the Fabric OS
Procedures Guide for
more information.
Power Supply #1
Fan Tray Assembly (containing
fans #1 and 2)
Quick Start Guide