Disabling The Command History Feature; Using Editing Features; Enabling And Disabling Editing Features - Cisco 2950G 24 - Catalyst Switch Software Configuration Manual

Chapter 2 Using the Command-Line Interface

Disabling the Command History Feature

The command history feature is automatically enabled.
To disable the feature during the current terminal session, enter the terminal no history privileged
EXEC command.
To disable command history for the line, enter the no history line configuration command.

Using Editing Features

This section describes the editing features that can help you manipulate the command line. It contains
these sections:
•
•
•

Enabling and Disabling Editing Features

Although enhanced editing mode is automatically enabled, you can disable it.
To re-enable the enhanced editing mode for the current terminal session, enter this command in
privileged EXEC mode:
Switch# terminal editing
To reconfigure a specific line to have enhanced editing mode, enter this command in line configuration
mode:
Switch(config-line)# editing
To globally disable enhanced editing mode, enter this command in line configuration mode:
Switch(config-line)# no editing
78-14982-01
Enabling and Disabling Editing Features, page 2-7
Editing Commands through Keystrokes, page 2-8
Editing Command Lines that Wrap, page 2-9
Catalyst 2950 Desktop Switch Software Configuration Guide

Using Editing Features

2-7