Configuring Rmon Collection On An Interface - Cisco 2950G 24 - Catalyst Switch Software Configuration Manual
Desktop switch
Hide thumbs
Also See for 2950G 24 - Catalyst Switch:
- Migration manual (25 pages) ,
- Datasheet (19 pages) ,
- Product support bulletin (5 pages)
Table of Contents
Advertisement
Chapter 22
Configuring RMON
Configuring RMON Collection on an Interface
You must first configure RMON alarms and events to display collection information.
Beginning in privileged EXEC mode, follow these steps to collect group history statistics on an
interface:
Command
Step 1
configure terminal
Step 2
interface interface-id
Step 3
rmon collection history index
[buckets bucket-number] [interval seconds]
[owner ownername]
Step 4
end
Step 5
show running-config
Step 6
show rmon history
Step 7
copy running-config startup-config
To disable history collection, use the no rmon collection history index interface configuration
command.
Beginning in privileged EXEC mode, follow these steps to collect group Ethernet statistics on an
interface:
Command
Step 1
configure terminal
Step 2
interface interface-id
Step 3
rmon collection stats index [owner ownername] Enable RMON statistic collection on the interface.
Step 4
end
Step 5
show running-config
78-14982-01
Purpose
Enter global configuration mode.
Enter interface configuration mode, and specify the interface on
which to collect history.
Enable history collection for the specified number of buckets and
time period.
•
For index, identify the RMON group of statistics The range
is 1 to 65535.
•
(Optional) For buckets bucket-number, specify the
maximum number of buckets desired for the RMON
collection history group of statistics. The range is 1 to
65535. The default is 50 buckets.
(Optional) For interval seconds, specify the number of
•
seconds in each polling cycle.
(Optional) For owner ownername, enter the name of the
•
owner of the RMON group of statistics.
Return to privileged EXEC mode.
Verify your entries.
Display the contents of the switch history table.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Enter interface configuration mode, and specify the interface on
which to collect statistics.
•
For index, specify the RMON group of statistics. The range
is from 1 to 65535.
•
(Optional) For owner ownername, enter the name of the
owner of the RMON group of statistics.
Return to privileged EXEC mode.
Verify your entries.
Catalyst 2950 Desktop Switch Software Configuration Guide
Configuring RMON
22-5
Advertisement
Table of Contents
Troubleshooting
