Cisco 2950G 24 - Catalyst Switch Software Configuration Manual page 605

Appendix B Working with the IOS File System, Configuration Files, and Software Images
Downloading an Image File By Using TFTP
You can download a new image file and replace the current image or keep the current image.
Beginning in privileged EXEC mode, follow Steps 1 through 3 to download a new image from a TFTP
server and overwrite the existing image. To keep the current image, skip Step 3.
Command
Step 1
Step 2
Step 3 archive download-sw /overwrite /reload
tftp:[[//location]/directory]/image-name.tar
Step 4
archive download-sw /leave-old-sw /reload
tftp:[[//location]/directory]/image-name.tar
The download algorithm verifies that the image is appropriate for the switch model and that enough
DRAM is present, or it aborts the process and reports an error. If you specify the /overwrite option, the
download algorithm removes the existing image on the Flash device whether or not it is the same as the
new one, downloads the new image, and then reloads the software.
78-14982-01
Purpose
Copy the image to the appropriate TFTP directory on the
workstation. Make sure the TFTP server is properly configured;
see the "Preparing to Download or Upload an Image File By Using
TFTP" section on page B-22.
Log into the switch through the console port or a Telnet session.
Download the image file from the TFTP server to the switch, and
overwrite the current image.
The /overwrite option overwrites the software image in Flash
•
with the downloaded image only if the image version of the
image being downloaded is the same as an existing copy in
Flash memory.
• The /reload option reloads the system after downloading the
image unless the configuration has been changed and not been
saved.
• For //location, specify the IP address of the TFTP server.
• For /directory/image-name.tar, specify the directory
(optional) and the image to download. Directory and image
names are case sensitive.
Download the image file from the TFTP server to the switch, and
keep the current image.
• The /leave-old-sw option keeps the old software version after
a download.
• The /reload option reloads the system after downloading the
image unless the configuration has been changed and not been
saved.
For //location, specify the IP address of the TFTP server.
•
• For /directory/image-name.tar, specify the directory
(optional) and the image to download. Directory and image
names are case sensitive.
Catalyst 2950 Desktop Switch Software Configuration Guide
Working with Software Images
B-23