Number Of Rings - VTech Three Handset Connect to CELL™ Answering System with Caller ID User Manual

Answering system settings

Number of rings

When the answering system is turned on, it answers all
incoming home calls after the number of rings set. You
can choose from two, three, four, five or six rings; or toll
saver. With toll saver selected, the answering system
answers after two rings when you have new messages,
and after four rings when you have no new messages.
This enables you to check for new messages and avoid
paying unnecessary long distance charges if you are
calling from outside of your local area. The default number
of rings is four.
To change the setting:
MENU
1. Press
2. Press or
press SELECT.
3. Press or
press SELECT.
4. Press or
press SELECT.
5. Press or
SET
then press
If you set the number of rings that the answering system answers calls as
3 rings, the answering system may not have enough time to announce the
caller's full information.
on the handset when it is not in use.
to highlight Answering sys, then
to highlight Ans sys setup, then
to highlight # of rings, then
to choose from 6, 5, 4, 3, 2 or Toll saver,
to save. You hear a confirmation tone.
78
ANS SYS SETUP
Cal l screening
# of rings
Remote code
Msg alert tone
BACK SELECT
# OF RINGS
6
5
4
3
BACK SET