VTech DS6421-2 Quick Start Manual

Bluetooth quick start guide
DS6421-2/DS6421-3/DS6421-4
Bluetooth setup
To use a Bluetooth enabled cell phone or headset with your
DS6421, you must first pair and connect your Bluetooth
device(s) with the telephone base. All DS6421 handsets can
be used to make or answer calls on the cell phone line.
Bluetooth wireless technology operates within a short range
(a maximum of approximately 30 feet). When you pair a
Bluetooth cell phone or Bluetooth headset to the telephone
base, make sure your Bluetooth device is close to the
telephone base to maintain sufficient signal strength.
Keep your Bluetooth device close
to the telephone base to maintain
a reliable connection.
• Refer to your user's manual for complete feature instructions.
• The pairing process may take up to one minute. If the pairing
process fails, try again.
• If you put the handset back in the telephone base or charger
while pairing, the process stops and the handset returns to
idle mode.
Pair and connect your first Bluetooth
cell phone
i
Before you begin, make sure you have cellular
coverage and your Bluetooth enabled cell phone
is not connected to any other Bluetooth device.
To pair and connect your first Bluetooth cell phone:
1. Press MENU.
to highlight Bluetooth,
2. Press or
then press SELECT.
3. Press SELECT to choose Add device.
SELECT to choose Add cellular.
4. Press
5. When the screen displays 1. If cell
is connected to BT device, please
disconnect it., press NEXT.
When the screen displays 2. Place
6.
cell phone next to base., press
NEXT to set the telephone base to
discoverable mode.
7. The handset displays Set cell to search
base: VTech DS6421 discoverable
PIN:0000. Promptly turn on the
Bluetooth feature of your cell phone and
search for or add new devices.
8. Once your cell phone finds your VTech phone, press
the appropriate key on your cell phone to continue the
pairing process.
9. Enter the PIN of the telephone base (the default PIN is
0000) into your cell phone.
10. When successfully connected, the handset displays
briefly Adding Cell Phone A to device list... and then
Cell Phone A is added and connected to base., and
then returns to idle mode.
Answering sys
Adding
Directory
Cel l Phone A
Cal ler ID log
to device
Intercom
list...
Bluetooth
BACK SELECT
The corresponding device light (D1 or D2) on the
BLUETOOTH
telephone base turns on.
Add device
Device list
If you have trouble pairing your cell phone, it may not
Download dir
Change PIN be compatible with your DS6421. Check the Bluetooth
compatibility list at www.vtechphones.com.
BACK SELECT
• The steps for the pairing process may vary for different cell
ADD DEVICE
phones. If this happens, follow the prompts on your cell phone
Add cel lular
and your DS6421 to complete the pairing process.
Add headset
• Refer to the user's manual of your cell phone on how to search
for or add a new Bluetooth device.
BACK SELECT
Pair and connect your first Bluetooth
headset
1. If cel l is
i
Before you begin, make sure your Bluetooth
connected to BT
enabled headset is not connected to any other
device, please
disconnect it. Bluetooth device.
Bluetooth headsets can only be used for calls on the
NEXT
home line.
To pair and connect your first
2. Place cel l
Bluetooth headset:
phone next to
base.
1. Press MENU.
2. Press or
BACK NEXT
then press
SELECT
Set cel l to
search base:
VTech DS6421
SELECT
3. Press
discoverable
PIN:0000
1
HANDSET
Cel l Phone A
is added
g g
and connected
to base.
12:30 12/25
pm
MENU
Answering sys
Directory
Cal ler ID log
Intercom
Bluetooth
to highlight Bluetooth
. BACK SELECT
BLUETOOTH
Add device
to select Add device.
Device list
Download dir
Change PIN
BACK SELECT
X