Ringer; Set Number Of Rings - VTech IS8128 User Manual

Ringer

Set number of rings

You can set the answering system to
answer an incoming call after two, three,
four, five or six rings; or toll saver.
If you choose toll saver, the answering
system answers a call after two rings
when you have new messages, or
after four rings when you have no new
messages. This enables you to check
for new messages and avoid paying
unnecessary long distance charges if you
are calling from outside your local area.
By default, the answering system answers
an incoming call after three rings.
Using a cordless handset or telephone
base:
1. Press MENU/SELECT when the phone
is not in use.
2. Press q CID or p
Answering sys, and then press
MENU/SELECT.
3. Press q CID or p
Ans sys setup, and then press
MENU/SELECT.
4. Press q CID or p
rings, then press MENU/SELECT.
5. Press q CID or p
6, 5, 4, 3, 2 or Toll saver.
• Toll saver - the answering system
answers a call after two rings when
you have new messages, or after
four rings when there is no new
to choose
to choose
to highlight # of
to choose from
106
message. This feature allows you to
check for new messages and avoid
paying long distance charges when
calling from out of your local area.
6. Press MENU/SELECT to save.