Answering System Setup; Call Screening - VTech Three Handset Connect to CELL™ Answering System with Caller ID User Manual

Answering system settings

Answering system setup

In the answering system setup menu, you can change the settings for call
screening, number of rings, remote access code, message alert tone and
recording time.

Call screening

Use this feature to choose whether incoming messages
are broadcast from the telephone base speaker when
they are being recorded. While monitoring an incoming
message, you can press
handset to answer the call.
To change the setting:
MENU
1. Press
2. Press or
press SELECT.
3. Press or
press SELECT.
SELECT
4. Press
5. Press or
SET
to save. You hear a confirmation tone.
/HOME/
on the handset when it is not in use.
to highlight Answering sys, then
to highlight Ans sys setup, then
to choose Call screening.
to choose On or Off, then press
or on the
FLASH
77
ANSWERING SYS
Delete al l old
Record memo
Answer ON/OFF
Ans sys setup
BACK SELECT
ANS SYS SETUP
Cal l screening
# of rings
Remote code
Msg alert tone
BACK SELECT
CALL SCREENING
On
Off
BACK SET