Remote Access Code - VTech Three Handset Connect to CELL™ Answering System with Caller ID User Manual

Answering system settings

Remote access code

A two-digit security code is required to access the
answering system remotely from any touch tone
telephone. The preset code is 19. You can change the
code to any number from 00 to 99.
To change the setting:
MENU
1. Press
2. Press or
press SELECT.
3. Press or
press SELECT.
4. Press or
press SELECT.
5. Use the dialing keys (0-9) to enter a two-digit number,
SET
then press
• Press
MUTE
• Press and hold
• Press to move the cursor to the right or
on the handset when it is not in use.
to highlight Answering sys, then
to highlight Ans sys setup, then
to highlight Remote code, then
to save. You hear a confirmation tone.
/DELETE to erase a digit.
/DELETE to erase all digits.
MUTE
to the left.
79
ANS SYS SETUP
Cal l screening
# of rings
Remote code
Msg alert tone
BACK SELECT
REMOTE CODE
19
BACK SET