Call Screening; Number Of Rings; Remote Access Code - VTech CS6429 User Manual

Answering system settings

Call screening

You can listen at the telephone base to a caller leaving a message. If you want to
turn off the call screening feature, use a system handset to turn this feature off.
Press MENU/
1.
2. Press or
3. Press or
/SELECT to select >CALL SCREENING.
4. Press
MENU
5. Press or
hear a confirmation tone.

Number of rings

You can set the answering system to answer an incoming call after two, three, four,
five, six rings; or toll saver. With toll saver selected, the answering system answers
a call after two rings if you have new messages, and after four rings when there are
no new messages. This feature allows you to check for new messages and avoid
paying long distance charges if you are calling from out of your local area.
Press MENU/
1.
2. Press or
3. Press or
4. Press or
5. Press or
/SELECT to save. You hear a confirmation tone.
6. Press
MENU

Remote access code

A two-digit security code is required to access the answering system remotely from
any touch-tone telephone. The default code is 19. You can set the code from 00 to 99.
Press MENU/
1.
2. Press or
3. Press or
4. Press or
5. Press the dialing keys (0-9) to enter the code or
then press
MENU
when the handset is not in use.
SELECT
to select >ANSWERING SYS, then press
to select >ANS SYS SETUP, then press
to choose ON or OFF, then press
when the handset is not in use.
SELECT
to scroll to >ANSWERING SYS, then press
to scroll to >ANS SYS SETUP, then press
to scroll to ># OF RINGS, then press
to scroll and choose among 2, 3, 4, 5, 6 or TOLL SAVER.
when the handset is not in use.
SELECT
to select >ANSWERING SYS, then press
to select >ANS SYS SETUP, then press
to select >REMOTE CODE, then press
/SELECT to save your selection. You hear a confirmation tone.
MENU
MENU
or
39
/SELECT.
MENU
/SELECT.
MENU
/SELECT to save. You
SELECT.
MENU/
/SELECT.
MENU
/SELECT.
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU
to select from 00 to 99,