Set Date And Time - VTech Three Handset Connect to CELL™ Answering System with Caller ID User Manual

Telephone settings

Set date and time

The answering system announces the day and time of each message prior
to playing it. If you subscribe to caller ID service, the day, month and time are
set automatically with each incoming call. If you do not want to set the date
and time automatically with caller ID information, turn this feature off (see
CID time synchronization on page 36). However, the year must be correct
so that the day of the week can be calculated from the
caller ID information. Before using the answering system,
set the date and time as follows.
To set the date and time manually:
1. Press MENU
2. Press or
press SELECT.
3. Use the dialing keys (0-9) to enter the month. For
example, enter 02 for February.
- OR -
Press or
press SET.
4. Repeat Step 3 to set the date and year, and then
press SET.
5. Repeat Step 3 to set the hour and minute, and then
press SET.
6. Press or
AM or 7 for PM. Then press
confirmation tone.
If the date and time are not set, the system announces,
"Time and day not set," before each message plays.
on the handset when it is not in use.
to highlight Set date/time, then
to choose the month and then
to choose AM or PM, or press 2 for
SET
to save. You hear a
31
Cal ler ID log
Intercom
Bluetooth
Ringers
Set date/time
BACK SELECT
SET DATE
09/30/09
MM/DD/YY
BACK SET
SET TIME
05:41 PM
BACK SET