Deleting The Entire Auto Dialer - Kyocera KM-F1060 Operating Instructions Manual

Deleting the Entire Auto Dialer

If you wish to delete the entire Auto Dialer data in your machine, type the following command in the body of
the email message:
@command
delete
@end
This command can also be inserted before the @begin to @end block, to erase the entire Auto Dialer data
first, then reprogram it with new data.
This method will also prevent the "Overwrite Warning Message" that is sent back from your machine, when
the current Auto Dialer station is overwritten.
To erase the entire Auto Dialer data, type the following command in the "Subject" line of your email:
#set abbr(password)#
(1) To
From
Subject
98
Setting Your Machine
To Edit the Retrieved or Backup Auto Dialer Data File
: Where the password is the Remote Password programmed in your
machine's User Parameters.
Retrieve and backup the existing data onto your PC first by following
the procedures for Retrieving and Editing on page 96.
IFAX
: Your machine's email address.
: This field is normally not visible when creating new email message(s).
It is your default email address (email application), for retrieving the Auto dialer
data and for error message notification.
(Can be programmed with the configuration tool of your email program.)
: To Delete data, type
(1)
: #set abbr(password)#