Table of Contents
Advertisement
1
Verify the version indicated on the rear panel of the
unit.
2
Verify the latest version.
Download the "NVMS Enterprise Edition
Installation Image Release Note" from the following
URL, and verify the software version.
https://www.sony.net/CameraSystem/NVMS/
Software
3
If the version of the software installed on the unit is
older, perform a clean installation of the software and
acquire the license file for the latest version.
For details on clean installation, refer to the NVMS
Enterprise Edition Maintenance Guide. For details
on acquiring the license file for the latest version,
refer to the NVMS License Guide.
Adding Device Licenses
Purchase and add licenses to increase the maximum
number of devices that can be registered. The additional
purchased licenses must also be applied to the unit's
license. For details on applying the additional licenses,
refer to the NVMS License Guide.
Note
For details on purchasing additional licenses, contact
your Sony dealer.
Installing the Management Server
on a Computer
When configuring a system with two or more Network
Video Recorders, the management server must be
installed on a computer separate from the Network Video
Recorders. Download the latest version of NVMS
Enterprise Edition for NVR from the following URL, and
install it on your computer.
SN: 1234567
SLC:123-456-789-ab-cdefgh-ijkl
Ver.: 1234
https://www.sony.net/CameraSystem/NVMS/
Software
For details on installation, refer to the NVMS Enterprise
Edition Administrator Manual.
Turning On the Unit
When you remove the unit's front panel and press the
power switch, the unit turns on and the POWER LED
lights blue.
When the unit is turned on for the first time, initial setup
for Windows will start. Proceed to the next section,
"Initial Setup for Windows."
Turning off the unit
Click the Start button (
and click [Shutdown] in the menu that appears.
Alternatively, if you press the power switch, the unit will
start the shutdown procedure and turn off after a few
minutes.
Initial Setup for Windows
When the following setup wizard appears after turning on
the unit, perform the following.
1
Select the system language, and click [Next].
2
Select you country or region, time and currency,
keyboard layout, and click [Next].
3
Enter the user name and computer name that will be
used for login, and click [Next].
4
Enter the user password and password hint, and click
[Next].
Enter the password twice for confirmation.
Enter a word or phrase that will remind you of your
password for the password hint.
18
) on the left side of the taskbar,
Advertisement
Table of Contents
