System Leds And Internal Health Led Status Combinations - Compaq 195294-001 - ProLiant - ML370R Setup And Installation Manual

System LEDs and Internal Health LED Status
Combinations
When the internal health LED on the front panel illuminates either amber or
red, the server is experiencing a health event. The combinations of illuminated
system LEDs and the internal health LED in the following table indicate
system status.
NOTE: The system management driver must be installed in order for the internal health
LED to provide pre-failure and system conditions.
The internal health LEDs on the front panel indicate the current hardware
status and are used to assist in initial troubleshooting. Note that in some
situations, Compaq Insight Manager XE reports server status differently than
the health LEDs because it tracks more system attributes.

System LEDs and Internal Health LED Status Combinations

System LED and Color
Processor failure, socket X
(amber)
Processor failure, both
sockets (amber)
PPM failure, slot X (amber)
Table E-8
Internal Health Status
LED Color
Red
Amber Processor in socket X is in pre-failure condition.
Red Processor types do not match.
Red
LED Indicators and Switches E-13
Processor in socket X has failed.
Processor has failed over to offline spare.
Processor is not installed in socket X.
ROM detects a failed processor during POST.
PPM in slot X has failed.
PPM X is not installed.
PPM is not installed, but the corresponding
processor is installed.
continued