Installing The System Board - Dell External OEMR R210II Owner's Manual

Figure 3-21. Removing and Installing the System Board
1
2
1 screws (10)

Installing the System Board

CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Unpack the new system board.
2 Remove the labels from the processor shield and affix them to the system
identification panel on the front of the system. See Figure 1-1.
3 Holding the system board by its edges, lower it into the chassis.
2 system board assembly
Installing System Components
95