Removing The Cooling Shroud - Dell External OEMR R210II Owner's Manual

Removing the Cooling Shroud

WARNING:
operation. Ensure that the memory modules and heat sink have had sufficient time
to cool before you touch it.
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
CAUTION:
Never operate your system with the cooling shroud removed. The
system may get overheated quickly, resulting in shutdown of the system and loss of
data.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening and Closing the System" on page 50.
3 Hold the touch points and gently lift the shroud straight up and away from
the chassis. See Figure 3-11.
The memory modules and heat sink can get very hot during normal
Installing System Components
67