Using The System Setup Program; And Boot Manager; Choosing The System Boot Mode - Dell External OEMR R210II Owner's Manual

Using the System Setup Program

and Boot Manager

The System Setup program is the BIOS program that enables you to manage
your system hardware and specify BIOS-level options. From the System Setup
program, you can:
• Change the NVRAM settings after you add or remove hardware
• View the system hardware configuration
• Enable or disable integrated devices
• Set performance and power management thresholds
• Manage system security

Choosing the System Boot Mode

The System Setup program also enables you to specify the boot mode for
installing your operating system:
• BIOS boot mode (the default) is the standard BIOS-level boot interface.
• UEFI boot mode is an enhanced 64-bit boot interface based on Unified
Extensible Firmware Interface (UEFI) specifications that overlays the
system BIOS. See "Entering the Boot Manager" on page 37 for more
information on this interface.
You must select the boot mode in the Boot Mode field of the Boot Settings
screen of the System Setup program. Once you specify the boot mode, the
system boots in the specified boot mode and you proceed then to install your
operating system from that mode. Thereafter, you must boot the system to
the same boot mode (BIOS or UEFI) to access the installed operating system.
Trying to boot the operating system from the other boot mode will cause the
system to halt immediately at startup.
NOTE:
Operating systems must be UEFI-compatible (for example, Microsoft
Windows Server 2008 x64 version) to be installed from the UEFI boot mode. DOS and
32-bit operating systems do not support UEFI and can only be installed from the
BIOS boot mode.
Using the System Setup Program and Boot Manager
2
25