Removing The Speakers - Dell SmartStep 200N Replacement Manual

Dell smartstep 200n and 250n removing and replacing parts
Hide thumbs Also See for SmartStep 200N:
Table of Contents

Advertisement

70
Speakers

Removing the Speakers

NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed battery.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE: Read
the following procedure.
Remove the
1
Remove the keyboard.
2
Remove the
3
Remove the
4
The speakers are located at both corners of the front of the bottom case.
Take note of the speaker cable routing so that you can replace the cables
properly under or between their routing clips.
2
1
10
9
"Preparing to Work Inside the
hard
drive.
display
assembly.
palm
rest.
8
7
Computer" before performing
3
6
4
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartstep 250n

Table of Contents