Display Panel - Dell SmartStep 200N Replacement Manual

48 Display Assembly and Di splay Latch
1
2
3
Remove the M2.5 x 6-mm screw holding the display inverter in place.
6
Lift the inverter, turn it upside down, and remove the inverter
7
connector cable.

Display Panel

NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed battery.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the
the following procedure.
Remove the keyboard.
1
Remove the display
2
Remove the display
3
inverter
M2.5 x 6-mm inverter screw
inverter connector cable
assembly.
bezel.
Computer" before performing