32
Hard Dr ive
Removing the Hard Drive
CAUTION: If you remove the hard drive from the computer when
do not touch
the drive is hot,
NOTICE: To prevent data loss, shut down the computer before removing the
hard drive. Do not remove the hard drive while the computer is on or in a
power management mode.
NOTICE: Hard drives are extremely fragile; even a slight bump can damage
the drive.
NOTICE: Read
"Preparing to Work Inside the
the following procedure.
Ensure that the work surface is flat and clean to prevent scratching the
1
computer cover.
Save and close any open files, exit any open programs, and shut down
2
the computer.
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed battery.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
Turn the computer over and remove the optical drive from the module
3
bay.
NOTICE: When the hard drive is not installed in the computer, store it in
protective antistatic packaging.
the metal housing of the hard drive.
Computer" before performing
Need help?
Do you have a question about the SmartStep 200N and is the answer not in the manual?