1 silver, round-headed M2 x
5-mm screws (2)
2 black M2.5 x 6-mm screws
(13)
3 black M2.5 x 6-mm screw
(1)
Remove the two silver, round-headed M2 x 5-mm screws from the left
7
side of the palm rest.
Turn the computer upside down and remove the 13 black M2.5 x 6-
8
mm screws from the bottom case.
Remove the black M2.5 x 6-mm screw from the front of the module
9
bay, and remove the silver M2 x 4-mm screw from the front of the
battery bay.
Pull up on the back of the palm rest, releasing the snaps that hold the
10
palm rest to the bottom case.
4
module bay
5
battery bay
6
silver M2 x 4-mm screw
(1)
Re ser v e Batter y and Pa lm Re st
59