Dell SmartStep 200N Replacement Manual page 33

1
Remove the four black, numbered M2.5 x 6-mm screws that attach the
4
hard drive to its base in the module bay. Remove the screws in
numerical order.
NOTICE: Pushing down on the top of the hard drive can damage the drive.
Slightly lift the hard drive and remove the drive from the bay by
5
pulling directly on the pull-tab at the front of the drive.
2
1 black, numbered M2.5 x 6-
mm screws (4)
2 hard drive
3 pull-tab
3
Hard Drive
33