Remove the hinge cover:
1
Using a plastic scribe, pry up under each end of the hinge cover
a
until it pops out.
NOTICE: Do not pull the hinge cover away from the computer immediately.
Remove the power button cable from the power-button board
b
connector located on the back of the hinge cover.
Lift the hinge cover away from the computer.
c
1
Remove the three silver, flat-headed M2 x 4-mm screws across the top
2
of the keyboard.
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-
consuming to replace. Be careful when removing and handling the keyboard.
3
1 silver, flat-headed
M2 x 4-mm screws (3)
2 keyboard
3 palm rest
2
37
Keyboard