Enabling Hibernate Mode - Dell SmartPC 100N Owner's Manual

FILE LOCATION: S:\SYSTEMS\Tang\owner\EMF\A00\8P550c20.fm
When the Welcome to Microsoft screen appears, click the green arrow
13
icon at the bottom of the screen to continue. Then follow the
instructions on the screen to complete the installation.
Remove the CD from the drive.
14
Reinstall the appropriate drivers (see page 41).
15
Reinstall your virus protection software.
16

Enabling Hibernate Mode

Click the Start button, point to Settings, and then click Control
1
Panel.
Double-click the Power Management icon.
2
Click the Hibernate tab.
3
Ensure that Enable hibernate support is selected, and click Apply.
4
Click OK to close the Control Panel.
5
DE LL CO NF I DE NTI A L – PR E LI M I N ARY 3/11 /02
So l v i ng P r o bl e m s 49