Fishtrack - Eagle FISHSTRIKE 1000C Installation And Operation Instructions Manual

Fig. 1 B
Fig. 1 A
Fish symbols appear
in surface clutter
Many fish Fewer fish
arches visible symbols visible
Fig. 2 B
Fig. 2 A
No fish shown
Fish arches
above structure
Figures 1A and 2A (left) show Sonar Page in normal chart mode. Figures
1B and 2B (right) show the same underwater scene with Fish I.D. turned
on. Note how arches are replaced with symbols.
FishTrack
The FishTrack feature shows the depth of a fish symbol when it
appears on the display. This lets you accurately gauge the depth of
targets. This feature is available only when the Fish I.D. feature is on.
The default setting for FishTrack is off.
To turn on FishTrack:
(Note: These instructions will turn on FishTrack and Fish I.D. at the
same time.)
1. From the Sonar Page, press |↓ to |
MENU S F ENT.
ONAR EATURES
→ ↓ to
| | | .
2. Press F D ENT EXIT EXIT
ISH EPTHS
To turn off FishTrack, repeat the instructions in step 1. Turning off
FishTrack in this manner will not turn off Fish I.D. symbols.
65