Fishtrack; Fishreveal - Eagle FishElite 320 Installation And Operation Instructions Manual

To turn the Fish I.D. feature on:
1. From the Sonar Page, press
2. Press → ↓ or → to
To turn off Fish I.D., repeat the instructions in step 1.
FishTrack
The FishTrack feature shows the depth of a fish symbol when it ap-
pears on the display. This lets you accurately gauge the depth of tar-
gets. This feature is available only when the Fish I.D. feature is on. The
default setting for FishTrack is off.
To turn on FishTrack:
(Note: These instructions will turn on FishTrack and Fish I.D. at the
same time.)
1. From the Sonar Page, press
2. Press → ↓ to
To turn off FishTrack, repeat the instructions in step 1. Turning off
FishTrack in this manner will not turn off Fish I.D. symbols.
Sonar Features menu with Fish I.D. Depths selected (at left, dual-
frequency menu; center, single-frequency menu). When the check box to
the left is checked, the feature is on. At right, Sonar Page showing Fish
I.D. symbols and FishTrack depths turned on.
FishReveal
When displaying actual sonar returns, the FishReveal feature uses 10
levels of gray tones to show fish targets hidden by surface clutter,
thermoclines, weed beds and other cover.
The normal mode of operation (with FishReveal turned off) shows the
weakest echoes as black and the strongest echoes in light gray. Since
all weak echoes are black, fish arches show boldly against the white
background. The drawback is that all weak echoes – such as thermo-
F ID S
ISH YMBOLS
|
F ID D
ISH EPTHS
|↓ to
MENU S
ONAR
| |
ENT EXIT
|↓ to
MENU S
ONAR
| |
ENT EXIT EXIT
64
|
F ENT
EATURES
| .
EXIT
|
F ENT.
EATURES
.
Symbols with
FishTrack depths
.