Fishtrack - Eagle 500C Installation And Operation Instructions Manual

finding information. This and other features can help you successfully
"see" beneath the boat under varied water and fishing conditions. So,
practice with the unit in both the Fish I.D. mode and without to become
more familiar with the feature. The default for Fish I.D. is off.
Sonar Features menu with Fish I.D. Symbols selected (at left, dual-
frequency menu; at right, single-frequency menu). When the check box
To turn the Fish I.D. feature on:
1. From the Sonar Page, press
2. Press ↓ to
F
To turn off Fish I.D., repeat these instructions.
FishTrack
The FishTrack feature shows the depth of a fish symbol when it ap-
pears on the display. This lets you accurately gauge the depth of tar-
gets. This feature is available only when the Fish I.D. feature is on. The
default setting for FishTrack is off.
To turn on FishTrack:
(Note: These instructions will turn on FishTrack and Fish I.D. at the
same time.)
1. From the Sonar Page, press
2. Press ↓ to
F
To turn off FishTrack, repeat the instructions in step 1. Turning off
FishTrack in this manner will not turn off Fish I.D. symbols.
to the left is checked, the feature is on.
|
S ENT
ISH YMBOLS
|
D ENT
ISH EPTHS
|↓ to
MENU S
| | .
EXIT EXIT
|↓ to
MENU S
| | .
EXIT EXIT
65
|
F
ONAR EATURES
|
F
ONAR EATURES
.
ENT
.
ENT