Eagle FISHSTRIKE 1000C Installation And Operation Instructions Manual page 78

3. When you have finished removing all the items you want from the
screen, press
EXIT
Overlay Data Shown, with water speed selected (left). Press ENT to
To move overlaid data:
You may find it useful to rearrange data floating in your display
window.
1. From one of the Map Pages, press
2. You'll see a list of the overlay data currently displayed. Select the
item you want to move and press
3. The data begins to flash on your screen. Use any combination of →,
←, ↑ and ↓ to move the data to a new location on the screen.
4. When satisfied, press
NOTE:
The Customize command and the Overlay Data command both use
the same information categories. The difference between the two
commands is the Customize command is only used to modify pages
with digital data boxes, while Overlay Data changes information
floating on the screen. See Customize Page Displays, on page 80 for
information on customizing data boxes.
To change displayed data font size:
1. From the Map or Sonar page, press
2. Press ↓ or ↑ to select Data Type|press → or ← to Data Size|
3. To return to the previous page, press
NOTE
You can also resize the data font size by selecting the data, then
. Use ↓ to choose Overlay Size, press
pressing
ENT
desired font size. Press
to return to the page display.
access Remove option (right).
|
EXIT EXIT
|
ENT EXIT
|↓ to
MENU
|→ to
ENT M
OVE
.
|↓ to
MENU
.
EXIT
| to return to display screen.
EXIT
70
|
O D
VERLAY ATA
| .
ENT
O D
VERLAY ATA
and select the
ENT
.
ENT
| .
ENT
.
EXIT