Eagle FISHSTRIKE 1000C Installation And Operation Instructions Manual page 77

Overlay Data Shown window (left); Data viewer with Sonar Data
To overlay information on your screen:
1. Press
MENU
2. If you have overlay data on your display, you'll see a list of that data
on the overlay data shown menu. To add data select
press . The data viewer shows information categories with "+" or "–"
ENT
symbols next to each category name. A category with a "+" next to it is
expandable, meaning its contents are hidden.
Selecting the category name and pressing
contents, so you can choose items within it. An expanded category (one
with a "–" next to its name) can be collapsed to hide its contents. Just
select the category and press
3. Expand any categories that might contain data you want to display.
Then press ↓ or ↑ to select a data option.
4. With the data option highlighted, press
uncheck it (turn it off). As you turn it on, the data will appear on top of
the screen. Every Page display has a maximum number of items you
can show using the Overlay Data command.
5. After the desired changes are made, press
page display.
To remove overlaid data:
1. While on the Page display that shows the item or items you want to
remove, press
2. You'll see a list of the overlay data currently displayed. Select the
item you want to remove from your display and press
remove the data. To remove another item, select the item and press
|
ENT ENT.
category expanded (right).
|↓ to
O
VERLAY
↓
| to
MENU O
VERLAY
| .
D ENT
ATA
.
ENT
|
D ENT
ATA
69
(E
NTER TO ADD
will show the category's
ENT
to check it (turn it on) or
ENT
|
EXIT EXIT
.
and
)
to return to the
|
ENT ENT
to